Yokomo SCR-6708T ESC Manual

Yokomo SCR-6708T ESC English Manual

No resource on the web for this, so I hit up my friend for a translation.

Setup Manual.

Nuetral and Max Value settings.
1. Make sure Propo Handset throttle EPA is at Max setting.
2. Propo Handset Throttle to Neutral.
3. Hold ESC button
-> Green LED Flashing
-> Let go
4. Push Propo Handset Throttle to MAX
-> Red LED Flashing
5. Push Propo Handset Throttle to MAX BRAKE
-> Red and Green Flashing
[Optional ABS]
Return Propo Handset Throttle to MAX Once within 3 seconds.
-> Red LED Flashing Again
6.Return Propo Handset Throttle to Neutral
-> Green LED Flashing
SETUP COMPLETE.

Time Delay Traction Control
1. Hold ESC button for 3 seconds.
-> Red LED Flashing
Then
2. Release ESC button
after Red LED flashes 1Time
   3. Push ESC Button
-> Minimum Traction Control set.
after Red LED flashes 2Times
   3. Push ESC Button
-> Medium Traction Control set.
after Red LED flashes 3Times
   3. Push ESC Button
-> Maximum Traction Control set.

Battery Type Selection

1. Hold ESC button for 5 seconds.
-> Red and Green LED Flashing
Then
2. Release ESC button
after Red and Green LED flashes 1Time (1 Second)
   3. Push ESC Button
-> Lipo set.
after Red and Green LED flashes 2Times (2 Seconds or More)
   3. Push ESC Button
-> Nicad/Nimh set.

Reverse Delay equipped.
You can't turn this off.
to operate.
Neutral then Back.

I take no responsibility for mis-information... But it's what Im going to try.
Any revisions, I'll post up later.

Russ.