It took a strong push to complete this machine. Leaving the dual process behind in favour of singular completion.
Progress pic as the final details were coming together. Body lines, Mirrors, dash, number plates, badges, wiring, diffuser, OMG! too much. The other body sits without lights at this point as the chassis is needed for best placement.
Any way... This body is a tribute is to where my RC Drift journey really started. "MAX-ONE"
Thus the MAX-ONE logo's differ this machine from the next build.
P!PES + L!GHTS are installed and I am already enjoying the backfire light unit BLU with brake lights, hazzards and more.
While I didn't go for the optic fibre light treatment in the rear, the results are awesome.
It won't take long to get used to the flame spitting rear end.
Kato-san's GT-R35 style is LOW so 2mm is more than enough ground clearance before power is applied.
The new twins are getting ready too.
MST knuckles are in use on my DRB-REW and allow for brakes up front.
Rear knuckles are DRB with MST Calipers on custom mounts and I've modified the Hex to be now 8mm with 11mm wheels and a 1mm spacer. The body likes 3.5mm of rear toe in as the way the rear guards look is very specific.
Now I can't wait to get both complete.