Sunday, May 5, 2013

Wrapping it up.


These bits and pieces should add another angle to my project. 85 degrees!!! hahaha



the spur adapter is a necessary item.


but these TN lower extensions and Upper arm mounts. Will work in with parts from  


this Type C conversion. Most of which will go to a better cause.


My 2 wheel drive body of choice.............. Tamiya Mazda Rx7. with a few RE-Xtreme additions of course.

14 comments:

  1. Looks like you're kicking things into high gear with the RWD project as well! Looking forward to the build~
    -GenkiRF

    ReplyDelete
  2. Well, it was all as planned.
    What i didn't plan was breaking the rear spool. So I can't test anything until a replacement comes. :(

    ReplyDelete
  3. I think you planned not to use Gyro for your RWD car

    ReplyDelete
  4. Can you please measure lenght of these wrap-up lower arms for me? :)
    Do they prevent using CVDs or are able to use with them?
    Thank you in advance.

    ReplyDelete
    Replies
    1. he is not going to use cvds at front and these are for more angle

      Delete
    2. I know, but I'm asking cause I want to use them in 4WD

      Delete
  5. Where can I buy WRAP-UP Y arm ?

    ReplyDelete
  6. Where did you get the TN Upper Arm pins? I cant seem to find them anywhere :)

    ReplyDelete
  7. in rc-art is not available 2.5mm Y arms

    ReplyDelete
  8. I use Super Rajicon

    email from their site.

    TN-628 are the pins. TN and Wrap Up update their blog more than their site.

    ReplyDelete
  9. Hallo,
    would these Y lower arms fit the DIB (without modifications)? I'm considering buying those arms but don't want to buy them and find out they don't fit. As you also have a DIB, I thought you would be the best person to ask this.
    Thnx!!!

    ReplyDelete
  10. there are 2 versions sold.

    the suspension pins are a different size for the main bushings.

    2.5mm for drift package or 3mm (I think this is DIB )

    you would need some extra parts to complete the lower arm ball joints etc
    but i think it's possible to fit with the extra parts.



    ReplyDelete

Got a question or a comment. It doesn't hurt to ask.