RE-Xtreme TA-06 PRO Tsunami Spec Phase 2.2 - SOLD

Here is the presentation of my amazing TA-06. Not only does it look good. It is an incredible performer.

SOLD

For a begginner looking to step up, and wanting the best of the best in a single purchace. Or a Tamiya drifter who until now has only had the VDF as their only option, this chassis takes the Tamiya item and raises the bar.

When I first tried the TA-06, it was incredible with only the Overdose steering and C Hubs, But I didn't want to have a 1.3 or 1.5 FCD machine. I wanted the crazy style of 2.2. With the standard Tamiya components you can really only get to about 1.5 FCD.  

As I became familiar with the TA-06 settings which are extremely forgiving. the chassis was performing well. My initial target was asphalt. But as I began spending more and more time on Carpet. I wasn't enjoying the plastic tub of the base car.

The opportunity arose to go for this drift spec carbon chassis conversion and that changed everything, what was already great, became amazing.

The balance on this is very nice. The center of the chassis allows for a lot of different configurations. Especially with short batteries. I was using a small patch of velcro to help an already secure centre section.

Parts from Tamiya, Tech Racing, RC-Square and Overdose eventually replaced ALL components. About the only real TA-06 original parts include the gearbox housing and idler gears.  

I love the chassis design also. It's tribal, wave is ultra cool!

The dry carbon finish is awesome!  I'll finish the story here and leave you to peruse the final shots of the bare chassis. With the right components, the result is amazing.

General description.
Tech Racing Carbon Drift Chassis Conversion with Finned heat sink Motor Mount, IFS dampers and one way front spool.
Overdose Drift Steering conversion, rear rigid axle, 8-8 deg C Carriers, Alloy Hubs, shorter 44mm shafts with 4mm extended axles, and alloy chassis stiffeners for IFS
RC Square alloy chassis bulkheads
Tamiya and X ray Alloy suspension mounts
+ much more and many spares. I've replaced lots.
Top line DRS 10 wheels included, tyres not included.

In this config it has done about 2 hours running only.

Please take it off my hands before I'm tempted to start using it again...
I have too many chassis right now.
I'm cleaning house.

Full Spec list.

Tamiya TA06 Pro Chassis Kit
Blue alloy Turnbuckle and Ball Joint set.
Team Bomber Short Front Turnbuckles
Yokomo Servo Turnbuckle
Kawada Hex Screw Set
Custom Tamiya Carbon rear suspension tower

RC Square
RC Square Lower Bulkhead front
RC Square Lower Bulkhead rear
RC Square Upper Bulkhead front
RC Square Upper Bulkhead rear
RC Square Stiffener rear
RC Square Aluminium Servo Mount
RC Square Aluminium Tensioner Support
RC Square Blue Aluminium Suspension Spacers

Tech Racing Drift Spec Chassis set.
Tech Racing 2.0mm Dry Carbon Lower Deck
Tech Racing 2.0mm Dry Carbon Upper Deck
Tech Racing 2.0mm Dry Carbon Upper Deck Stiffener
Tech Racing Blue Aluminium Deck Supports
Tech Racing Screws and Battery stays.
Tech Racing Motor Mount

RE-Xtreme CS 2.2 pulley set
Tech Racing TA-06 Three Way front axle (One Way Setting)
F Kazama 41T Alloy
FC RC Square 13T Alloy
FR RC Square 20T Alloy
R Tamiya 16T Plastic
RC Square Front Belt 171-57T
Eagle Pulley Mount
Kawada Low Friction Main Belt (to be upgraded free. Just a bit tight)
Overdose TA-06 rear rigid axle
Overdose 44mm front universal driveshaft and extended stub axle set.
Overdose 44mm rear universal driveshaft and extended stub axle set.

Overdose Tamiya 8 degree castor 8 degree camber Hub and Knuckles
Overdose Steering for TA-06
Overdose Front Stiffener for TA-06
Overdose Front IFS Rocker Arm for TA-06
Overdose Rear hub TA-06
Tamiya Carbon TB-Evo Graphite Long Suspension Arms
Team XRay Blue Aluminium Suspension Mount FF 1XC Bar
Tamiya Blue Aluminium Suspension Mounts FR 1XC Separate
Tamiya Blue Aluminium Suspension Mounts RF 1XD Separate
Team XRay Blue Aluminium Suspension Mounts RR 1X

TRF Damper Main Set
Overdose Long Spring Seat for Tamiya (Link)
Active damper pistons.
Yokomo Oil 300 F&R
Spring Rear: Kazama Soft
Spring Front: Kazama Soft
Tech Racing Blue Aluminium IFS Dampers Alternate setting Medium.

RE-Xtreme TSUNAMI Spec TAMIYA PRO TA-06 CS 2.2 TR SQ OD
with Overdose Tech Racing and RC Square

Tamiya TA06 Pro Chassis Kit
Blue alloy Turnbuckle and Ball Joint set.
Team Bomber Short Front Turnbuckles
Yokomo Servo Turnbuckle
Kawada Hex Screw Set
Custom Tamiya Carbon rear suspension tower

RC Square (Link)
RC Square Lower Bulkhead front
RC Square Lower Bulkhead rear
RC Square Upper Bulkhead front
RC Square Upper Bulkhead rear
RC Square Stiffener rear
RC Square Aluminium Servo Mount
RC Square Aluminium Tensioner Support
RC Square Blue Aluminium Suspension Spacers

Tech Racing Drift Spec Chassis set. Link
    Tech Racing 2.0mm Dry Carbon Lower Deck
    Tech Racing 2.0mm Dry Carbon Upper Deck
    Tech Racing 2.0mm Dry Carbon Upper Deck Stiffener
    Tech Racing Blue Aluminium Deck Supports
    Tech Racing Screws and Battery stays.
    Tech Racing Motor Mount

RE-Xtreme CS 1.8 pulley set
    Tech Racing TA-06 Three Way front axle (One Way Setting) (Link)
    F Kazama 41T Alloy
    FC RC Square 13T Alloy (Link)
    FR RC Square 20T Alloy
    R Tamiya 16T Plastic
    RC Square Front Belt 171-57T
    Eagle Pulley Mount
    Kawada Low Friction Main Belt
    Overdose TA-06 rear rigid axle ( Link)
    Overdose 44mm front driveshaft and stub axle.
    Overdose 44mm rear driveshaft and stub axle.

Overdose Tamiya 8 degree castor 8 degree camber Hub and Knuckles (Link)
Overdose Steering for TA-06
Overdose Front Stiffener for TA-06
Overdose Front IFS Rocker Arm for TA-06
Overdose Rear hub TA-06
Tamiya Carbon TB-Evo Graphite Long Suspension Arms
Team XRay  Blue Aluminium  Suspension Mount FF 1XC Bar
Tamiya  Blue Aluminium Suspension Mounts FR 1XC Separate
Tamiya  Blue Aluminium  Suspension Mounts RF 1XD Separate
Team XRay  Blue Aluminium  Suspension Mounts RR 1X

TRF Damper Main Set
Overdose Long Spring Seat for Tamiya (Link)
Active damper pistons.
Yokomo Oil 300 F&R
Spring Rear: Kazama Soft
Spring Front: Kazama Soft
Tech Racing Blue Aluminium IFS Dampers Alternate setting Medium.

+ Many Many Many spare parts.

Tamiya TA06 Pro ドリフトスペックコンバージョンシャーシ　 

◆RC Square◆
アルミフロントロアバルク
アルミリヤロアバルク
アルミフロントアッパーバルク
アルミリヤアッパーバルク
アルミリヤステフナー
アルミサーボホルダー
アルミベルトテンショナー
アルミスペーサー

◆Tech Racing◆
ＴＡ０６ドリフトスペックコンバージョン
2.0mm ハイトラクションマットカーボンメインシャーシ
2.0mm ハイトラクションマットカーボンアッパーデッキ
リヤマットカーボンステフィナー。
アルミデッキサッポート
モターマウントヒートシンック
Tech Racing IFS　ダンパー
CS 2.2 pulley set
Tech Racing TA06 3WAYワンウェイハウジングセット

F Kazama 41T アルミプーリー 、 FC RC Square 13T アルミセンタープーリー、
FR RC Square 20T アルミセンタープーリー　、 R Tamiya 16T
RC Square カウンタードリフト用フロントベルト 171-57T、
Eagle アルミセンタープーリーホルダー
Kawada Low Friction Main Belt　＊＊
OVERDOSE　リヤリジットアクスルセット
切れ角UP対応ドライブシャフトセット　
(44mm/2mmピン,　フロントとリア 、アルミCハブ＆アップライトセット8-8（For タミヤ / ライトブルー）
アルミリヤアップライト　ライトブルー
アルミステアリングクランクセット
アルミフロントステフナー

Tamiya Carbon TB-Evo Graphite ロングサスアーム
Team XRay ブルアルミサスマウントFF 1XC Bar
Tamiya ブルアルミサスマウント FR 1XC Separate
Tamiya ブルアルミサスマウント RF 1XD Separate
Team XRay ブルアルミサスマウントRR 1X
TRF ダンパー

OVERDOSE アルミスプリングエンド（For タミヤ/ライトブルー）
アクティブ ダンパーピストン
Yokomo Oil 300 F&R、
Spring Rear: Kazama Soft、Spring Front: Kazama Soft

ブルーアルミ ターンバックル
Team Bomber フロントターンバックル
Yokomo Servo ターンバックル
Kawada Hex Screw Set、Custom
Tamiya カーボンリヤショックタワー
DRS－１０　ホイール　ＯＦＦ＋９（２本）ＯＦＦ＋１２（２本）
The Chassis is FOR SALE. CLICK HERE for more details